Model Name ST-4200

GS1 (EAN) CODE 4260318511469

System Type 2-Channel Class D Amplifier

Output Power all channels driven 20Hz - 20 kHz, 0.1 % THD

2 x 4000W @ 2Ohm

2 x 3000W @ 4Ohm

2 x 2000W @ 8Ohm Output

Power Bridge mode

1 x 8000W @ 4Ohm

1 x 6000W @ 8Ohm THD+N @ 8Ω

1kHz,1dB ≤0.06%

Slew Rate >60v/μs

Frequency Response @1Watt, 8Ohm 10Hz -34kHz / ±0.3dB

Damping Factor (1kHz and below) >450:1

Signal to Noise Ratio 20Hz -20 kHz >100dBA

Channel Separation Crosstalk@1kHz >70dB Voltage Gain 46dB (0,775V:153V)

Input Sensitivity selectable 0.775V/1V/1.5V/2V

Input Impedance 30k Ohm Balanced 15k Ohm

Unbalanced Front Control Power switch, Gain control Rear Control Sensitivity Switch, Mode Switch LED Indicators Signal -30dB / -10dB, green Signal -4dB, yellow Clip, orange Protect, red power, green Bridge, yellow

Input Connectors XLR Active balanced pin1 gnd / pin 2+ / pin3-

Output Connectors 2 Neutrik NL4 Sockets 2 Binding Posts

Cooling Continuously Variable speed fan Protection Full short circuit, Open circuit, thermal, Ultrasonic, RF Protection. Stable Into reactive or Mismatched loads Load Protection On/Off muting DC fault power Supply shutdown

Operating Voltage 220V (+/- 10%) 50-60Hz

Fuse T-25A

Dimensions (h/w/d) 19“/2U 483W x 451D x 88H

Net weight 22,5 kg