Specification

CA250

Rated Power
(1kHz, THD + N = 0.1%)

8Ω stereo RMS Power

2 x 250W

4Ω stereo RMS Power

2 X 375W

2Ω stereo RMS Power

2 X 430W

8Ω bridge RMS Power

700W

4Ω bridge RMS Power

850W

Crossover

Low Pass 

0Hz-120Hz-6dB

Low Cut

120Hz-20kHz-6dB

Frequency Response (+0/-0.3dB, 1W/8Ω)

20Hz-20KHz (+/-1dB)

Power Bandwidth (rated power at 4Ω, 1% THD+N)

20Hz-20kHz,-0.84dB/+0dB

Tour Class Protection

DC protect, Short circuit protect, High temperature protect, Current inrush protect, Input overload protect, Output, Soft startup protect

THD + N (rated power, 4Ω/1kHz)

<0.5%

SMPTE IMD (rated power at 8Ω, 50Hz & 7kHz)

<0.5%

Damping Factor (10-400Hz at 8Ω)

≥300

Input CMRR (1kHz)

≥60dB

Standard Input Sensitivity (rated power at 8Ω)

1V  

Input Impedance (balanced/unbalanced)

20kΩ /10kΩ

Hum and Noise (”A” weighted,-80 dBW)

95dB

Crosstalk (”A” weighted, full power at 4Ω)

≥60dB

Class

AB

Input Connectors (per channel)

XLR or Jack

Output Connectors (per channel)

2-way binding posts or Speakon connectors

Power Supply (factory configured)

220V/60Hz

Idle Current Draw (220V)

0.2A

1/8 Power Curr. Draw (typical music cond., 220V/4Ω)

2.8A

1/3 Power Curr. Draw (cont. music cond., 220V/4Ω)

5.0A

Max. Curr. Draw (continuous music cond., 220V/4Ω)

8A

Thermal Emissions (1/8 Power, 4Ω)

2030BTU/hr

Thermal Emissions (1/3 Power, 4Ω)

2726BTU/hr

Cooling

2-speed DC fan, air flow from front to rear

Controls

Front panel: 2 attenuators, power switch; Rear panel; signal ground lift & mode switches; filter switch

LED Indicators (per channel)

Limiter, Signal, protect, power

Construction

Steel chassis, 16 gauge. Double thickness in rack ear areas.

Dimensions (Height x Width x Depth to rear rack ears)

88 x 482 x 397mm

Gross Weight

13kgs

Net Weight

10kgs